Specifications
GFI FaxMaker 9 Appendix 1: Microsoft® Exchange 2000/2003 Connector | 110
9 Appendix 1: Microsoft
®
Exchange 2000/2003 Connector
The SMTP connector is a standard Microsoft
®
Exchange SMTP connector, configured torouteto GFI
FaxMaker server all emails addressed to faxmaker.com, smsmaker.com, fax: and sms:.
NOTE
The default fax (faxmaker.com) and SMS(smsmaker.com)domains can be
customized by the GFI FaxMaker administrator. For more information, refer to Fax and
SMS domain names (page 26).
Access the connector from:
1. Launch Exchange System Manager and expand Connectors node.
2. Right click FaxMaker SMTP connector and select Properties.
9.1 Creating the connector automatically
GFI FaxMaker installed on Microsoft
®
Exchange Server
During installation, GFI FaxMaker automatically configures a Microsoft
®
Exchange connector to allow
processing of faxes and SMS.
No further configuration is required post-installation.
GFI FaxMaker installed on a separate machine
To configure connector when installing GFI FaxMaker on a separate machine than Microsoft
®
Exchange 2000/2003 server:
1. Run the GFI FaxMaker setup on the Microsoft
®
Exchange Hub Transport server.
2. When choosing the components to install, disable GFI FaxMaker Fax Server and select Exchange
2000/2003/2007/2010/2013 SMTP connector.
3. In the next screen, specify the IP address or server name of the GFI FaxMaker server.
4. Proceed with installation.
For more information refer to the Installation procedure section of the GFI FaxMaker Getting
Started Guide available from http://www.gfi.com/fax-server-software/manual/.
9.2 Creating the connector manually
1. From Microsoft
®
Exchange server, launch Exchange System Manager and right-click Connectors
node.
2. Select New > SMTP Connector.