Specifications

GFI FaxMaker 3 General configuration settings | 14
Device Type Settings
GFI Fax Modem
Driver
Modem type - Select the fax modem type.
Advanced Modem Options - GFI FaxMaker ships with a number of pre-configured devices.
Click to create new devices or manually configure device options. For more information,
refer to Fax modem properties (page 19).
Initialisation string - Displays the string used by the modem driver to initialize the modem.
Rings until answer - Configure the number of rings before answering incoming calls.
Tone dialling - If supported, select this option for faster dialling. If disabled, pulse dialling is
used.
Wait for dialtone - Starts dialling only when a dial tone is established.
Check for busy tone - Checks if line is busy before sending fax.
Speaker mode - Configure speaker settings: Always Off, Until Connected or Always On.
Speaker volume - Set the appropriate volume.
Microsoft
®
FaxModemDriver
Type - Select the Fax type.
Rings until Answer - Configure the number of rings before answering incoming calls.
NOTE: Ensure that the Fax Server role is installed and the Fax service is running from the
Services applet.
Fax Services Displayssettings for the selected Fax Service line. To send faxes through an online fax provider,
specify your account details in the Fax Services node. For more information, refer to Fax services
(page 32).
IMPORTANT:
Online fax services require the full recipient number, including the international dial symbol "+",
the country and area codes. Do not use hyphens, spaces or dashes between any parts of the fax
number.
The full recipient number is also required when sending faxes locally. In this case, the fax is still
charged at a local fax rate.