Specifications
GFI FaxMaker 3 General configuration settings | 15
Screenshot 8: The line options tab
4. From the Line options tab, configure:
Option Configuration
Max. resolution Set the maximum resolution for faxes sent and received on this line.
Max. speed Set the maximum speed for faxes sent and received on this line. Alower speed limit will increase
call duration but on an analog line, it helps to avoid loss of quality when there is noise in the
telephone line.
Local fax ID This number is sent to recipient faxes as part of the transmission process. The fax number is usually
entered here.
NOTE: Some PABX devices do not accept the local fax ID when making outbound calls. When the fax
device is behind this type of PABX device, leave this field empty.
Receive
incoming faxes
Allow receiving faxes on this fax line.
Send outgoing
faxes
Allow transmission of faxes on this fax line.
Dial prefix &
suffix
If your lines are located behind a PBX, you can specify a dial prefix or suffix.
Do not dial
prefix if fax
number is
Exclude dialling of prefix when the fax number is less than, equal to or more than a certain number
of digits. This can be useful when using different providers for local, national or international faxes.
Fax header Key in the text to show at the very top of a fax, for example the company name.
Number of
retries
Sets the number of times GFI FaxMaker will try to re-send a fax.
Retry delay Set a delay between retries, in seconds.
Table 5: Fax line - Line options