Specifications

GFI FaxMaker 3 General configuration settings | 17
Option Configuration
Generate beep
tone before
capture
Fax device gives a beep when answering a call as a signal to the user to enter the DTMF number.
If available, it is recommended that this option is always selected. From the drop down list select
the tone of the beep.
Flash after DTMF
capture and before
fax tone
Only used for Multitech modems. Select this option so that after successfully detecting a tone,
the fax server goes 500ms on hook (flash).
Screenshot 10: The users tab
6. From the Users tab, select the users allowed to send faxes using this line. Configure:
Option Description
All users/groups can send on this line Allows all licensed users to send faxes on this line.
Listed users/groups can send on this line Limits the users that can send faxes on this line.
Add… Specify users/groups allowed to send faxes on this line.
Delete Deletes selected users/groups from the list of allowed users.
Reserve line only for listed users/groups Sets the line exclusively reserved for the selected users/groups
Table 7: Fax line users