Product manual

GFI LanGuard 8 Remediate Vulnerabilities | 131
Screenshot 84: Power Management
4. From the Power Management tab, select the following options:
Allow this device to wake up the computer
Only allow a magic packet to wake the computer
Note
Magic Packet is the wake up signal that is sent by GFI LanGuard to the scan target
network card.
5. Click OK.
Once the Network Interface Card is configured, run a FULL scan on the client machine. This enables
GFI LanGuard to gather the required information from the client machine. For more information,
refer to Manual scans (page 66).
IMPORTANT
If you have routers between the client machine and the GFI LanGuard machine, the
router and the GFI LanGuard machine must be configured to allow Wake-on-LAN
broadcast packets on UDP port 9.