Product manual

GFI LanGuard 8 Remediate Vulnerabilities | 132
8.1.5 Configuring end-user reboot and shut down options
When configuring After Deployment settings, in Auto-remediation options, you can configure GFI
LanGuard to notify and let the user decide when to reboot or shut down the computer after
completing an administrative task. The below dialog opens on the user’s computer and enables
him/her to select one of the following options:
Screenshot 85: Reboot/shut down options
The table below describes the available options:
Option Description
Restart now Reboots/shuts down the computer immediately after completing an administrative task.
Remind me in Specify a time interval (in minutes), when to remind the end-user.
Restart on Specify the date and time when the machine reboots/shuts down.
Don’t bother me again The user is not prompted again.
Table 53: Advanced deployment options
8.1.6 Configuring auto-remediation messages
GFI LanGuard enables you to automatically display warning messages before and after remediation
operations. These messages are displayed on the end-users' computer and in some cases, allows them
to select after deployment options, or notify them about the operations to be carried out. You can
customize predefined messages and set the language according to the scan target's computer
language.
To configure warning messages:
1. Launch GFI LanGuard.
2. Click Remediate tab > Remediation Center.
3. From Remediation Center, select a remediation action, such as Deploy Software Updates.