Product manual

GFI LanGuard 12 Scanning Profile Editor | 203
12.4.1 Configuring TCP/UDP port scanning options
Screenshot 142: Scanning Profiles properties: TCP Ports tab options
Option Description
Enabling/disabling TCP Port scanning To enable TCP Port Scanning in a particular scanning profile:
1. From the Network & Security Audit Options tab, click TCP Ports sub–tab.
2. Select the scanning profile that you wish to customize from the left pane
under Profiles.
3. Select Enable TCP Port Scanning option.
Configuring the list of TCP ports to be
scanned
To configure which TCP ports will be processed by a scanning profile:
1. From Network & Security Audit Options tab, click TCP Ports sub–tab.
2. Select scanning profile to customize from the left pane under Profiles.
3. Select TCP ports to analyze with this scanning profile.
Customizing the list TCP ports 1. From the Network & Security Audit Options tab, click TCP Ports sub–tab.
2. Select the scanning profile that you wish to customize from the left pane
under Profiles.
3. Customize the list of TCP Ports through Add, Edit or Remove.
Table 78: TCP Port scanning options
Note
The list of supported TCP/UDP Ports is common for all profiles. Deleting a port from the
list will make it unavailable for all scanning profiles