Product manual

GFI MailArchiver 15 Appendix 3 - Using the Port Changing Tool | 295
15 Appendix 3 - Using the Port Changing Tool
The Port Changing Tool enables you to check for port conflicts on the server where GFI MailArchiver is
installed and change remoting ports quickly and easily.
IMPORTANT
After upgrading GFI MailArchiver from a previous version, port numbers are reverted
back to their original default setting, so you will need to run the Port Changing Tool
again.
Screenshot 158: Port Changing Tool user interface
To use the Port Changing Tool:
1. Launch the tool from Program Files > GFI\MailArchiver > Tools > PortChange and click
PortChange.exe
NOTE
Fields with a yellow background denote contents are read-only and cannot be changed.
2. Click Check Port Conflict to identify any ports on your machine that are being used by another
application. The tool stops and restarts GFI MailArchiver services during this process. If a conflict is
identified, the conflicting port number is marked in red. Ports without conflict are marked in green.
3. Type a new value in the Change To field of the port you want to update, then click Apply Change.
The tool checks again for any port conflicts with the newly entered value and applies the change.