Quick Start Operating Guideline

Quick Start Operating Guideline
Digital Camcorder
DD747
Parts and Names
1. Installing the battery
1) Pull the battery compartment cover in the direction as shown on the
battery compartment cover and open it;
2) Load the battery;
3) Slide and close the battery compartment cover.
. 3 .. 2 .. 1 .
2. Taking out the battery
1) Turn off the power supply;
2) Pull the battery compartment cover in the direction as shown on the battery compartment cover and open it;
3) Push the battery lock to make the battery bounce out, and take out the battery;
4) Slide and close the battery compartment cover.
3. Installing the SD card
4. Taking out the SD card
1) Turn off the power supply;
2) Pull the battery compartment cover in the direction as shown on the battery
compartment cover and open it;
3) Insert the SD card (with its unfilled corner forward) till a snap sound is heard;
4) Close the battery compartment cover.
1) Turn off the power supply;
2) Pull the battery compartment cover in the direction as shown on the battery compartment cover and open it;
3) Press the SD card inwards, and it will automatically pop up;
4) Take out the SD card, and close the battery compartment cover.
5. Charging the battery
. 4 .
6. Turning on and turning off the video camera
1) Load the battery.
2) Check that the machine is turned off.
3) Use the attached charger to connect it to the power supply.
4) Plug the other end of the charger into the USB port of this machine to charge. At the moment, the charge
indicator is red, and the charging process begins.
5) Wait till the charge indicator turns to green. When the indicator becomes green, this indicates that the
battery is fully charged. This process requires about 3 hours in most cases.
6) This machine does not support charge during its startup.
1) Turn-on: Press the Power key at OFF status, and the system will start up automatically and the turn-on
finishes;
2) Turnoff: Press the Power key at On status, and the system will shut off automatically and the turnoff finishes.
. 5 .
7. Operating the LCD
8. Selecting operation mode
9. Shoot and playback
1) Open the LCD;
2) Adjust the angle of the display in a rotation manner in accordance with the angle required by record or play.
Maximum rotation angle: Switching: 90°; Forward: 180°; Backward: 90°.
1) Pull the Record/playback key to carry out switchover between the record mode and the playback mode;
2) In the record or playback mode, press the mode key to switch over operation modes in turn:
Record mode: video recording capture audio recording video recording
Playback mode: photo video audio recording MP3 E-book photo
1) Capture: Switch the record mode to the capture mode, and press the shutter key to capture;
2) Video recording: Switch the record mode to the video recording mode, press the shutter key to start to
carry out video recording, and then press the shutter key once more to stop video recording.
3) Audio recording: Switch the record mode to the audio recording mode, press the shutter key to start to
carry out audio recording, and then press the shutter key once more to stop audio recording;
4) Playback: In the playback mode, select the photo, video, audio recording, MP3 or E-book mode, and then
select a file to play.
Hang rope button
Status indicator
Five-way joysticks
Shutter key
Menu key
Mode key
Record/playback switch key
Flash switch/delete key
Power key
Speaker
Display screen
Microphone
Lens
Flash
Self-timer indicator
USB port/charger port
Earphone/video output port
10. Connecting to a computer
1) Set the USB mode as memory in the setting menu;
2) Plug the USB cable into the video camera USB port;
3) Connect the other end of the USB cable to a computer. At the moment, the computer displays a new
driver letter, and you can copy media files in the video camera to the computer;
4) Never plug in or pull out the USB cable during the transmission of files.
Digital Camcorder
Lithium ion battery
Strap
Camera Pouch
USB Cable
AV-Cable
Rapid Guide
Driver CD
AC-Adaptor
S/N
Description
Qty
Packing List
1
2
3
4
5
6
7
8
9
1
1
1
1
1
1
1
1
1
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.

Summary of content (30 pages)