Quick Start Operating Guideline

7
4) Press the Right key to select 【Yes】 in the pop-up dialog box, and press 【Enter】
so as to finish the formatting operation.
Caution:
1) When you format the card, all data in the memory will be deleted.
2) Please don't format the card with a personal computer. Otherwise, the machine may
not identify the card.
2.4 Selecting the language
1) Press 【Power】 key lightly to start up the machine
2) Press 【Menu】 key, then press 【Right】 key to enter 【Settings】 menu.
3) Press 【Down】 key to select 【Language】.
4) Use 【Left】【Right】keys to select the menu language you desire, and press 【Enter】
key.
2.5 Setting the date and time
1) Press 【Power】 key lightly to start up the machine.
2) Press 【Menu】 key, then press 【Right】 key to enter 【Settings】 menu.
3) Press 【Down】 key to select 【Clock】.
4) Press the 【Right】key to access the clock setting page, and then use 【Up】【Down】
【Left】【Right】 key to set correct date and time.
5) When setting is finished, just press 【Enter】key.
2.6 How to charge
If the battery power is inadequate, you may recharge it in accordance with the following
procedures:
1) Load the battery.
2) Check that the machine is turned off.
3) Use the attached charger to connect it to the power supply.
4) Plug the other end of the charger into the USB port of this machine to charge. Here
the charge indicator is red, and the charging process begins.
5) Wait till the charge indicator turns green. When the indicator turns green, this indicates
that the battery is fully charged. This process requires about 3 hours in most cases.
6) This machine does not support charge during its startup.