Instruction Manual

19
 Selftimer (Picture Record Mode Only)
The Selftimer allows you to take pictures with a ten-second time delay. When the Selftimer is
activated, the Selftimer LED on the front of the camera beneath the flash light will blink. The
speed of blinking will increase just before the picture is taken.
To enable Selftimer:
1. When in Camera Mode, use Up/Down Buttons to select Selftimer, then press Enter Button
to switch to Selftimer submenu.
2. Use Up/Down Buttons to choose On or Off.
3. Press Enter Button to validate the setting and exit.
Display Screen
Selftimer Options
 Sharpness
You can soften and sharpen images to achieve different effects.
To change Sharpness setting:
1. When in Camera Mode, use Up/Down Buttons to select Sharpness Option, then press
Enter Button to switch to Sharpness submenu.
2. Use Up/Down Buttons to select Sharpness then press Enter Button to switch to Sharpness
submenu.
3. Use Up/Down Buttons to move between nine levels. The change can be previewed
immediately.
4. Press Enter Button to validate the setting and exit.
Display Screen
Change Sharpness Setting
Enter Button
Enter Button