Instruction Manual

22
select “USB Mode”;
c) Press the LEFT/RIGHT button
to
select “mass storage” or “PC camera” ; then
double press “MENU” to confirm and exit.
K. Firmware version
a) Power on and press “MENU” to enter
“Setup”;
b) Press the UP/DOWN button
to
select “Firmware version”;
c) Press the RIGHT button
to enter, it will
display the firmware version and update date.
d) Press “MENU” again to exit.
II. Software & download
1. PC-CAM driver installation
Insert the CD into the CD-ROM of your PC, An
interface appears as follows, Click the “Install
Camera Driver” to install the camera driver.