Operation Manual

62
63
8.4.1.1.2 Sram gear lever for MTB
1. Pedal in the direction of the drive.
2. Press gear lever A past the first click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of fur-
ther connected gears.
8.4.1.1.3 Shimano brake/gear lever combination for MTB
1. Pedal in the direction of the drive.
2. Press gear lever A past the first click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of fur-
ther connected gears.
8.4.1.1.4 Shimano brake/gear lever combination for racing bike
1. Pedal in the direction of the drive.
2. Press gear lever A past the first click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of
further connected gears.
8.4.1.1.5 Shimano brake/gear lever combination for Di2 electric switching for racing bike
1. Pedal in the direction of the drive.
2. Press switch A once. The next gear is engaged.
3. To skip several gears, press switch A repeatedly.
8.4.1.1.6 Sram brake/gear lever combination for racing bike
1. Pedal in the direction of the drive.
2. Press gear lever A firmly past the first click position until an audible click is heard and then release it
again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of
further connected gears.