Operation Manual

100
Malfunction Possible cause(s) Remedy
Brakes do not work Brakes not correctly installed Contact your specialist bicycle
dealer immediately.
Brakes damaged Contact your specialist bicycle
dealer immediately.
Decreasing braking effect,
brake levers can be pulled
too far
Brake linings or brake blocks
worn
Have the brake linings or brake
blocks replaced immediately in an
approved workshop.
With hydraulic brakes: Brake
system leaking
Contact your specialist bicycle
dealer immediately.
The brake drags Brake disc or rim damaged Contact your specialist bicycle
dealer immediately.
Incorrect brake adjustment
The wheel is not straight Front wheel: Install your front
wheel correctly (see section 13.1,
Dismantling and installing wheels)
Rear wheel: Install your rear
wheel correctly (see section 13.1,
Dismantling and installing wheels)
15.3 Frame, saddle post and suspension
WARNING Danger from falls and accidents
Defects and faults in the frame and suspension can lead to dangerous riding situations, falls, acci-
dents and material damage.
• Contact your specialist bicycle dealer immediately if you notice the slightest malfunction.
• You should only use your bike again when it has been properly repaired by the specialist bicycle
dealer.
Problem Possible causes Remedy
Noises: Cracking, banging,
grinding, etc.
Frame, saddle post and/or
suspension damaged
Contact an approved workshop
immediately.