Operation Manual

44
• Pay attention to the correct insertion depth of the saddle post.
1. Carry out a visual inspection of the saddle post. The “STOP” or “MAX” mark must not be visible.
2. Try to twist the saddle and post in the frame by hand.
It must not be possible to twist the saddle and saddle post.
3. Try to move the saddle in its clamping with your hand by alternately pushing down and pulling up.
The saddle must not move.
4. If the saddle and/or saddle post can be moved, they should be tightened up (see section 8.6.3, Opening
and closing the quick-release axle on the saddle post clamping and section 8.1, Adjusting the saddle
height).