Operation Manual

62
8.4.1.1 Switching to a larger chainring/sprocket
The gear change for your bike can be found in the table in section 4.4.3, Gear change.
8.4.1.1.1 Shimano gear lever for MTB
1. Pedal in the direction of the drive.
2. Press gear lever A past the fi rst click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of
further connected gears.
8.4.1.1.2 Sram gear lever for MTB
1. Pedal in the direction of the drive.
2. Press gear lever A past the fi rst click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of
further connected gears.
8.4.1.1.3 Shimano brake/gear lever combination for MTB
1. Pedal in the direction of the drive.
2. Press gear lever A past the fi rst click position until an audible click is heard and then release it again.
3. To skip several gears, keep pressing the lever. The number of clicks corresponds to the number of
further connected gears.