Operation Manual

GHOST-BIKES
89
13.1.5 Opening and closing the brakes
DANGER Risk from brake failure
In order to remove and install your wheels, you have to open the rim brakes and close them again
after installation. If you do not close the rim brake again after installation, your brake will not work.
This means that serious falls and accidents are very likely.
• Close the brake after installing the wheel.
You can fi nd the type of brake that your bike has in section 4.3.2, Brake type.
NOTE:
Disc brakes cannot be opened.
13.1.5.1 Opening the Magura HS 33 hydraulic rim brake
1. Fold over the mounting lever and pull the brake off the brake holder.
2. Ensure that any loose spacer washers are not lost.