Instructions / Assembly

3BUTTON PREMIUM REMOTE TRANSMITTER INSTRUCTIONS

™

www.GhostControls.com

GENERATING A NEW TRANSMITTING KEY CODE

CAUTION

Please READ and PROCEED with EXTREME CAUTION

Each GHOST CONTROLS® remote transmitter has a unique key code sequence. Once a new key

sequence is generated, the previous key code is lost. The new key code will need to be programed or

“learned” into the gate operator to control the gate.

Step LED/Alarm

Before Pressing

Button(s) Sequence to

Press

LED/Alarm

After Pressing

Description

Press & hold AND

simulataneously for 10

seconds on Remote until the

LED goes

LED on Remote

goes

Tells the Remote transmitter

that you are going to generate

a new code. Step 2 & 3 must be

completed within 5 seconds while

the LED is lit.

Release AND

3 Remote LED is

Press & release or

on Remote

LED goes The remote button pressed in this

step is now generating a new code.

™

PAGE 1
GENERATING A NEW TRANSMITTING KEY CODE CAUTION Please READ and PROCEED with EXTREME CAUTION Each GHOST CONTROLS® remote transmitter has a unique key code sequence. Once a new key sequence is generated, the previous key code is lost. The new key code will need to be programed or “learned” into the gate operator to control the gate.
PAGE 2
STANDARD REMOTE INSTRUCTIONS PROGRAMMING All GHOST CONTROLS® remote transmitters must be programmed before they will operate the Gate Operator System so that the safety and security of your system is maintained. Programming Remote to Gate Controller Step This device complies with Part 15 of the FCC Rules.