SDS

There are no additional ingredients present, which, within the current knowledge of the supplier and in the concentrations applicable,
are classified as hazardous to health and hence require reporting in this section.
SECTION 4: FIRST AID MEASURES
Eye Contact: Remove contact lenses if worn. Rinse opened eye for several minutes under running water. If symptoms persist, consult a
doctor.
Inhalation: Remove victim to fresh air and keep at rest in a position comfortable for breathing. If notbreathing, if breathing is irregular
or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It may be dangerous to the person providing
aid to give mouth-to-mouth resuscitation. Get medical attention if adverse health effects persist or are severe. If unconscious, place in
recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a collar, tie, belt or
waistband. In case of inhalation of decomposition products
Skin Contact: Flush contaminated skin with plenty of water. Continue to rinse for at least 20 minutes. Get medical attention. Wash
clothing before reuse. Clean shoes thoroughly before reuse.
Ingestion: Wash out mouth with water. Remove dentures if any. Remove victim to fresh air and keep at rest in a position comfortable for
breathing. If material has been swallowed and the exposed person is,
conscious give small quantities of water to drink. Stop if the exposed person feels sick as vomiting may be dangerous. Do not induce
vomiting unless directed to do so by medical personnel. If vomiting occurs, the head should be kept low so that vomit does not enter the
lungs. Get medical attention if adverse health effects persist or are severe. Never give anything by mouth to an unconscious person. If
unconscious, place in recovery position and get medical attention immediately. Maintain an open airway. Loosen tight clothing such as a
collar, tie, belt or waist- band.
Most Important Symptoms/Effects, Acute and Delayed Potential Acute Health Effects
Eye Contact: Causes serious eye damage
Inhalation: Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.
Skin Contact: Causes mild skin irritation
Ingestion: Harmful if swallowed. Irritating to mouth, throat and stomach
Over Exposure Signs/Symptoms
Eye Contact: Adverse symptoms may include the following: Pain orirritationWatering
Redness
Inhalation: No known significant effects or critical hazards.
Skin Contact: Adverse symptoms may include the following:
IrritationRedness
Ingestion: Harmful if swallowed. Irritating to mouth, throat and stomach
Indication of Immediate Medical Attention and Special Treatment Needed, If Necessary
Notes to Physician: In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need
to be kept under medical surveillance for 48 hours.
Specific Treatments: No specific treatment
Protection of First Aiders: No action shall be taken involving any personal risk or without suitable training. It may be dangerous to the
person providing aid to give mouth-to-mouth resuscitation.
SECTION 5: FIRE-FIGHTING MEASURES
Extinguishing media
Suitable extinguishing media: Use an extinguishing agent suitable for the surrounding fire.
Unsuitable extinguishing media: None known
Special hazards arising from the chemical: At temperatures above 60°C/140°F acid action on most metals may release hydrogen, a
highly flammable and explosive gas.
Hazardous thermal: decomposition products
At temperatures above 60°C/140°F acid action on most metals may release hydrogen, a highly flammable and explosive gas.
Decomposition products may include the following materials: carbon dioxide carbon monoxide nitrogen oxides hydrochloric acid
Special protective actions: No special measures are required. for fire-fighters
Special protective: Fire-fighters should wear appropriate protective equipment and self-contained breathing equipment for fire-fighters
apparatus (SCBA) with a full face-piece operated in positive pressure mode.