SDS

ManualsBrandsGhostshield ManualsBuilding materials1-gal. Invisible Penetrating Concrete Sealer Plus Densifier and Hardener

SAFETY DATA SHEET

1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION

Product name:

SILA-TEK 3500

Manufacturer:

KRETETEK INDUSTRIES

66 RIVER ROAD

HUDSON, NH 03051

Telephone:

855-573-8383

In case of emergency call:

800-424-9300

CHEMTREC

HAZARDS IDENTIFICATION

GHS Classification: Skin Irrit. 2

Eye Irrit. 2

Hazards summary: Alkaline. Irritation to eyes and skin.

Hazard pictogram:

Signal word: Warning

Hazard statements:

H315: Causes skin irritation

H319: Causes serious eye irritation.

Precautionary statements:

P262: Do not get in eyes, on skin, or on clothing.

P280: Wear protective gloves/protective clothing/eye protection/face protection.

P303+P361+P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse

skin with water/shower.

P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses,

if present and easy to do. Continue rinsing

COMPOSITION/INFORMATION

ON INGREDIENTS

Chemical and Common Name

CAS Registry Number

Wt. %

OSHA PEL

ACGIH TLV

Water

7732-18-5

Not Established

Silicic acid, sodium salt;

Sodium silicate

1344-09-8

Not Established

4. FIRST AID MEASURES

Eye:

Irrigate with eyewash solution or clean water, holding eyelids apart, for at least

15 minutes. Obtain immediate medical attention.

Skin:

Wash affected skin with plenty of water. If symptoms develop, obtain

medical attention.

Summary of content (4 pages)

PAGE 1
SAFETY DATA SHEET 1. CHEMICAL PRODUCT AND COMPANY IDENTIFICATION Product name: Manufacturer: SILA-TEK 3500 KRETETEK INDUSTRIES 66 RIVER ROAD HUDSON, NH 03051 Telephone: In case of emergency call: CHEMTREC 855-573-8383 800-424-9300 2. HAZARDS IDENTIFICATION GHS Classification: Skin Irrit. 2 Eye Irrit. 2 Hazards summary: Alkaline. Irritation to eyes and skin. Hazard pictogram: Signal word: Warning Hazard statements: H315: Causes skin irritation H319: Causes serious eye irritation.
PAGE 2
Inhalation: Remove patient from exposure, keep warm and at rest. Obtain medical attention. Ingestion: Do not induce vomiting. Wash out mouth with water and give 200-300 ml (half a pint) of water to drink. Obtain medical attention. Most important symptoms and effects, both acute and delayed: Alkaline. Irritating to eyes and skin. The toxicity of sodium silicate is dependent on the silica to alkali ration and on the pH.
PAGE 3
Eye/Face protection: Chemical goggles (EN 166) Skin protection: Wear suitable protective clothing and gloves. Plastic or rubber gloves. For example EN374-3, level 6 breakthrough time (>480min). Wear suitable overalls. Environmental Exposure Controls: The primary hazard of sodium silicate is the alkalinity. Avoid release to the environment. 9.
PAGE 4
12. ECOLOGICAL INFORMATION Toxicity: Lithium compounds ‒ no data Persistence and degradability: Inorganic. Soluble silicates, upon dilution, rapidly depolymerize into molecular species indistinguishable from natural dissolved silica. Bio accumulative potential: Inorganic. The substance has no potential for bioaccumulation. Mobility in soil: N/A Results of PBT and vPvB assessment: Not classified as PBT or vPvB.