Use and Care Manual

ManualsBrandsGhostshield ManualsBuilding materials1-gal. Concrete and Masonry Water Repellent with High Gloss Wet Look Finish

Technical Data Sheet

ULTRAVIOLET (UV) EXPOSURE AND WEATHERING

5505

PRODUCT DATA

Sections

HIGH PERFORMANCE, CLEAR, SOLVENT BASED

METHYL-METHACRYLATE SEALER THAT

ENHANCES PROTECTS AND PROVIDES A CLEAR

HIGH GLOSS FINISH .

CRYLI-TEK® 5505

09 97 00

Special Coatings

A new high performance

nanotechnology driven clear

high gloss solvent based low

VOC blend of 100% methyl and

ethyl methylate polymers.

Cryli-Tek® 5505 enhances and

darkens the concrete surface

providing a beautiful and

durable high gloss ﬁnish. It has

an extremely fast set time and

unsurpassed stain resistance.

The treated surfaces will resist

chipping, ﬂaking, delamination

and breakdown with UV light

exposure.

Used as a superior and

specialized compound for

sealing concrete, exposed

aggregate, stamped/stenciled

concrete and other decorative

masonry surfaces.

Formulated for decorative

concrete applications where a

glossier one-coat spray or roller

applied ﬁnish is desired.

Appearance/color!

Clear

Coverage!

Up to 300 ft²/gallon

KreteTek Industries Inc. 66 River Road Hudson, NH 03051 // 855-573-8383 // www.ghostshield.com

Percentage Improvement vs. Control

CRYLI-TEK®

5505

Low solids

coating

Traditional

coating

Leading brand

coating

30%

36%

47%

55%

Meets the requirements of:

ASTM D 3359, ASTM D 3363,

ASTM D 4541, ASTM G 155,

ASTM D 523, ASTM C 1315,

ASTM C 309, Fed TTC-C-800A

Description

Summary of content (4 pages)

PAGE 1
5505 PRODUCT DATA Technical Data Sheet Sections 97 00 09 09 Special Coatings CRYLI-TEK® 5505 HIGH PERFORMANCE, CLEAR, SOLVENT BASED METHYL-METHACRYLATE SEALER THAT ENHANCES PROTECTS AND PROVIDES A CLEAR HIGH GLOSS FINISH . Description A new high performance nanotechnology driven clear high gloss solvent based low VOC blend of 100% methyl and ethyl methylate polymers. Cryli-Tek® 5505 enhances and darkens the concrete surface providing a beautiful and durable high gloss nish.
PAGE 2
5505 PRODUCT DATA Technical Data Sheet Sections 97 00 09 09 Special Coatings TECHNOLOGY // ADVANTAGES • Composition - Nanotechnology driven high-performance solvent based methyl-methacrylate TYPICAL PROPERTIES • Reduces surface absorption and stops dusting of concrete for easier cleaning and maintenance Appearance - Clear liquid • Non-yellowing high gloss sealer provides protection and improved appearance to concrete Packaging - 1 gallon (3.78 L), 5 gallon (18.9 L) pails and 55 gallon (189.
PAGE 3
Sections 97 00 09 09 Special Coatings PRODUCT DATA APPLICATION Surface Prep 1. New “green” concrete must be properly cured. Concrete should obtain 80% of design strength, typically achieved within 14-28 days. 2. The concrete substrate must be structurally sound and clean of oil, grease, dirt, wax, curing compounds, ef orescence, paints, previous sealers, adhesives and other contaminants that might interfere with the penetration of the sealer.
PAGE 4
5505 PRODUCT DATA Technical Data Sheet Sections 97 00 09 09 Special Coatings APPLICATION Warranty Precautions/Safety Avoid contact with skin, eyes and clothing, do not take internally. Use appropriate safety equipment during application and handling. Please refer to the safety data sheet (SDS) for additional precautionary instructions before use. Best Performance • • • • • Proper application is the responsibility of the user.