MSDS

CRYLI-TEK 5505
MATERIAL SAFETY DATA SHEET
!
1. PRODUCT AND COMPANY IDENTIFICATION
PRODUCT NAME: GHOSTSHIELD CRYLI-TEK 5505
MANUFACTURER: KreteTek Industries
STREET ADDRESS: 1000 N West Street
CITY, STATE, ZIP: Wilmington, DE 19801
INFORMATION PHONE: [phone]
EMERGENCY PHONE: Chemtrec 800-424-9300
DATE REVISED: 1/1/14
2. COMPOSITION OF COMPONENTS
COMPONENTS CAS NO. OSHA PEL ACGIH TLV OSHA STEL
PROPRIETARY NON HAZARDOUS SEALER NONE NONE NONE
* DIBUTYL PHTHALATE 84-74-2
* XYLENE 1330-20-7
* INDICATES HAZARDOUS MATERIALS PER REQUIREMENTS OF SECTION 313 OF TITLE III AND OF 40 CFR 372.
3. FIRST AID MEASURES
EYES:
IMMEDIATELY FLUSH EYES WITH WATER FOR 15 MINUTES AND SEEK MEDICAL ATTENTION.
SKIN:
FLUSH SKIN IMMEDIATELY WITH WATER FOR 15 MINUTES AND SEEK MEDICAL ATTENTION IMMEDIATELY IF NECESSARY.
INGESTION:
INDUCE VOMITING AND SEEK MEDICAL ATTENTION. ALLOW VICTIM TO DRINK AS MUCH COLD WATER AS POSSIBLE.
INHALATION:
REMOVE TO FRESH AIR AND RECEIVE MEDICAL ATTENTION IF ILL EFFECTS PERSIST.
NOTES TO PHYSICIANS OR FIRST AID PROVIDERS:
4. FIRE-FIGHTING MEASURES
FLAMMABLE LIMITS IN AIR, UPPER: not available
(% by volume) LOWER: not available
FLASH POINT:
0
F 22
METHOD USED:
SETA FLASH
EXTINGUISHING MEDIA:
FOAM, ALCOHOL FOAM, CO2, DRY CHEMICAL, WATER FOG
SPECIAL FIRE FIGHTING PROCEDURES:
SELF CONTAINED BREATHING APPARATUS AND PROTECTIVE CLOTHING SHOULD BE WORN IN FIGHTING FIRES INVOLVING CHEMICALS.
UNUSUAL FIRE AND EXPLOSION HAZARDS:
VAPORS ARE HEAVIER THAN AIR AND CAN TRAVEL ALONG THE GROUND TO IGNITION SOURCES.