Use and Care Manual
TECHNICAL DATA SHEET
KreteTek Industries Inc. | 1000 N West St Wilmington, DE 19801 | 855-573-8383 | www.ghostshield.com
CRYLI-TEK® 5505
An industrial-grade, solvent-based, non-yellowing, acrylic sealer that enhances, protects, and provides a
clear, high-gloss finish. Cryli-Tek 5505 is the industry’s highest performing decorative sealer. This unique
formula leaves the surface with a high gloss, wet look shine with a clear, non-yellowing finish. This product
has an extremely fast set time and an unsurpassed stain resistance. The treated surfaces will resist chipping,
flaking, delamination and breakdown with UV light exposure.
APPLICATIONS
Exceptional when used for:
• Substrates: Concrete, stamped concrete, pavers, exposed aggregate, stone
• Applications: Patios, pool decks, driveways, walkways
BENEFITS
• Easy to clean surface
• Enhanced surface appearance
• Durable high gloss finish
• Re-coatable with another solvent based acrylic
• Easy to apply
• Reduces dirt pick up
• Prevents mold/mildew growth
• Intercoat adhesion
• Prevents water ingress
• Resists weathering
• Resists carbonation, weak acids and alkaline solutions
• Wind erosion and general exposure resistant
• Resists UV degradation
PREPARATION
Avoid contact with skin, eyes and clothing. Wash hands after use and do not take internally. Please refer to
the product Safety Data Sheet (SDS) before using. The preparation process should be followed to ensure
adequate penetration and optimum performance:
Step 1:
The concrete substrate must be structurally sound, thoroughly dry and clean. Wait at least 24-48
hours after rain and/or pressure washing before sealing; concrete should be visibly dry.
Step 2:
Remove all paints, previous sealers and/or adhesives before application.
Step 3:
The substrate must be clean of oil, grease, dirt, wax, curing compounds, efflorescence and other
contaminants that might interfere with the penetration of the sealer.