Use and Care Manual

TECHNICAL DATA SHEET
KreteTek Industries Inc. | 1000 N West St Wilmington, DE 19801 | 855-573-8383 | www.ghostshield.com
APPLICATION NOTES
• Before application test the sealer by applying in an inconspicuous area to ensure the desired
coverage and appearance is achieved.
• Do not over apply.
• Prevent from getting on glazed and finished surfaces such as glass, aluminum etc. In case of contact
flush immediately with water.
• Do not use on concrete that has been previously sealed without chemically etching or mechanically
scarifying.
• Water repellency may take up to seven (7) days to develop.
•
Maintenance:
The concrete surface can be cleaned with mild soap and water. No citrus or vinegar-
based products should be used. Organic does not always mean “mild” and can include citrus
ingredients that you’ll want to avoid.
TECHNICAL SPECS
• Feature: Water, Oil & Stain Repellent
• Chemistry: Modified Silane/Siloxane
• Color: Clear
• Finish: Invisible
• Category: Penetrating
• Carrier: Water
• Availability: Concentrate: Makes 1/2 Gallon
• Packaging: 1 Pint (16 oz.)
• Coverage: 60 sq. ft. per coat
• Reconstitution Ratio: 1 part sealer : 3 parts water
• Interior/Exterior: Interior/Exterior
• Application Method: Roller, Brush
• Application Temperature: 45 F - 90 F
• Number of Coats: 2
• Time Between Coats: 5 Minutes
• Drying Time (dry to touch): 6 Hours
• Drying time (full cure): 24 Hours
• Time before/after rain: 48 Hours
• New Concrete: Yes, at least 28 days after being poured
• Storage/Shelf Life: 1 Year
• Clean up: Soap/water
• Paintable: No
• VOC Content: 0 g/L
WARRANTY/LIMITATIONS OF LIABILITY
We warrant that our products are manufactured to strict quality assurance specifications and that the
information supplied by us is accurate to the best of our knowledge. Such information supplied about our
products is not a representation or a warranty. It is supplied on the condition that you shall make your own
tests to determine the suitability of our product for your particular purpose. Any use or application other
than recommended herein is the sole responsibility of the user. Listed physical properties are typical and