Being the most versatile penetrating sealers in the Pro Line, Siloxa-Tek® products are suitable for substrates like brick and cinderblock in addition to concrete. Like the 8505, an oleophobic additive in the 8510 eases oil clean-up; but unlike other Siloxa-Tek formulas, 8510 is solvent-based for superior protection. Covering up to 400 square feet per coat, the 8510 boasts 100% actives and cures clear in 24 hours.
Distinguished by oil stain prevention and low VOC content, this water-based concrete sealer also protects against damage from moisture intrusion, chlorides, and road deicing salt. The perfect solution for garages, driveways and busy backyard patios. Repelling water, salt and oil, this penetrating sealer dries clear and ships ready-to-use or concentrated in single gallons.
A water-based epoxy coating designed to repel chemicals and resist abrasion, this two-component system is perfect for indoor garages or warehouse-type applications that require extra durability. Best when used in a thin mil system as a primer for the Urethane 645 topcoat. Available in clear or a small variety of colored semi-gloss finishes and shipped in one, two, or five-gallon kits.
This two-component urethane coating is designed to resist chemicals and abrasion caused by heavy machinery. For indoor use only, it’s best used in applications that require high durability in a thin mil system as a topcoat with the Epoxy 325 as a primer. Urethane 645 is solvent-based and available in a clear or colored high-gloss “wet look” finish. A revolutionary two-component polyaspartic coating designed to repel chemicals and resist abrasion. It has a rapid cure time for faster application.
Industrial-grade and water-based, this acrylic sealer protects concrete from mold and light staining while leaving it breathable. Non-yellowing and ultraviolet-resistant, the 5500 dries clear with a low-sheen “satin” finish. It’s an ideal sealer for any application or substrate that benefits from an extra touch of class and beauty. This industrial-grade, solvent-based acrylic sealer enhances color and protects against mold, mildew and surface staining.
An industrial-grade, water-based, sodium densifier for use as a stand-alone product or as a primer to strengthen and harden concrete. This clear penetrating sealer densifies and hardens concrete making it up to 50% stronger, and is also great for polishing concrete. Available concentrated in single gallons, one gallon concentrate makes five gallons ready-to-use. An industrial-grade, water-based, lithium densifier designed for use as a stand-alone product or as a primer to strengthen and harden concrete.
Protect the warm luster and beauty of indoor concrete countertops and fixtures with this water-based, non-toxic concrete sealer that dries with a low-sheen “satin” finish. For indoor or outdoor concrete countertops, integral sinks, fire places, furniture, fire pits and planters, Countertop 770 is a water-based, non-toxic, clear-drying concrete sealer.
