Use and Care Manual

Technical Data Sheet
8505
PRODUCT DATA
09 35 00
Chemical-Resistant Tiling
Sections
APPLICATION
07 19 16
Water Repellents
KreteTek Industries Inc. 1000 N West Street Wilmington, DE 19801 // 855-573-8383 // www.ghostshield.com
07
09
Clean Up - Clean equipment, tools and surfaces with hot soapy
water. Unused or old material may be disposed of in a waste
disposal site in accordance with local, state and federal laws.
Precautions/Safety - Avoid contact with skin, eyes and clothing, do
not take internally. Use appropriate safety equipment during
application and handling. Please refer to the safety data sheet (SDS)
for additional precautionary instructions before use.!
Best Performance
• Proper"application is the responsibility of the user.
• Will not inhibit water penetration through unsound or cracked
surfaces with defective flashing, caulking or structural
waterproofing."
• Spills should not be allowed to sit for extended periods of
time, clean all spills in a timely manner.
• Make sure the most current versions of technical data sheets
and safety data sheets are being used."
Coverage
1 coat:"150 - 400"square feet per gallon. 2 coats: 75 - 200 square
feet per gallon."Variations in texture and porosity of substrate will
affect the coverage and performance of the product.
KreteTek Industries Inc. !
1000 N West Street
Wilmington, DE 19801
www.Ghostshield.com!
Customer Service and Technical Support!
1-855-KreteTek (1-855-573-8383)
Warranty
KreteTek Industries Inc. warrants this product to be free from manufacturing
defects and to meet the technical properties on the current Technical Data
Sheet if used as directed within shelf life. Satisfactory results depend not only
on quality products but also upon many factors beyond our control. KreteTek
Industries Inc. makes no other warranty or guarantee, express or implied,
including warranties of merchantability or fitness for a particular purpose
with respect to its products. The sole and exclusive remedy of Purchaser for
any claim concerning this product, including but not limited to, claims
alleging breach of warranty, negligence, strict liability or otherwise, is the
replacement of product or refund of the purchase price at the sole option of
KreteTek Industries Inc. Any claims concerning this product must be received
in writing within one (1) year from the date of shipment and any claims not
presented within that period are waived by Purchaser. KreteTek Industries Inc.
will not be responsible for any special, incidental, consequential (including
lost profits) or punitive damaged of any kind.
Purchaser must determine the suitability of the products for the intended use
and assumes all risks and liabilities in connection therewith. This information
and all further technical advice are based on KreteTek Industries Inc. present
knowledge and experience. However, KreteTek Industries Inc. assumes no
liability for providing such information and advice including the extent to
which such information and advice may relate to existing third party
intellectual property rights, especially patent rights, nor shall any legal
relationship be created by or arise from the provision of such information and
advice. KreteTek Industries Inc. reserves the right to make any changes
according to technological progress or further developments. The Purchaser
of the Product(s) must test the product(s) for suitability for the intended
application and purpose before proceeding with a full application of the
product(s). Performance of the product described herein should be verified by
testing and carried out by qualified experts.
For professional use only.!
Last revised 4/17
6