Specification

B. First, put big canopy ⑧ and small canopy with pad ⑨ onto short extension tube with
head ⑥. During this, please pay attention to the direction of ⑧ and ⑨. The big opening of
⑧ should be toward the head of ⑥, and the black washer side of
⑨ should be toward the head of ⑥.
C. Remove R-shaped pin and locking rod from ①,lead the wires on through
⑥, and assemble ⑥, ⑧, ⑨ onto the central tube of .During this, first align the holes on
⑥ with holes on central tube well and insert the ⑳ and then lock it with ⑲. The wires inside
the central tube may stop the insertion, then you may need some minor adjustment of the
wire’s position to manage it.
D. Tighen up the two screws on central tube of
E. Push down the small canopy with pad ⑨ to the bottom of .
⑲ ⑳ ①
①
①
①
6
8
9
8
19
21
05