SDS

Safety Data Sheet
Glitter Topcoat
Version: 1, Revision: 2, Date of issue: May 10, 2021, p. 6 of 10
SECTION 10: Stability and reactivity
10.1 Reactivity
None known, based on available information.
10.2 Chemical stability
Stable under recommended storage conditions. See Section 7, Storage.
10.3 Conditions to avoid
Exposure to elevate temperatures can cause product to decompose. Generation of gas during decomposition can
cause pressure in closed systems. Avoid direct sunlight or ultraviolet sources. Do not distill to dryness. Product can
oxidize at elevated temperatures. Generation of gas during decomposition can cause pressure in closed systems.
Avoid heat, flames, sparks, ignition sources, and incompatible materials. Do not pressurize, weld, braze, solder,
drill, grind or expose empty containers to heat, flame, sparks, static electricity, or other sources of ignition. This may
cause for an explosion and cause injury or death.
10.4 Incompatible materials
Avoid contact with strong acids, strong bases, strong oxidizers, ammonia, and chlorine.
10.5 Hazardous decomposition products
Decomposition products depend upon temperature, air supply and the presence of other materials. Decomposition
products can include and are not limited to: Aldehydes, alcohols, ketones, ethers, organic acids, carbon monoxide,
and carbon dioxide.
10.6 Hazardous polymerization products
This product will not undergo polymerization.
SECTION 11: Toxicological information
Toxicological information on this product or its components appear in this section when such data is available.
11.1 Information on toxicological effects
The toxicological information on this product appear in this section when such data is available.
Primary routes of entry
Skin contact, eye contact, and inhalation.
11.2 Acute toxicity
Components
Median Lethal dose
Control Parameters / Basis
Dipropylene Glycol Monomethyl Ether (CAS no.:
34590-94-8)
LD50 (oral, rat)
LD50 (dermal, rabbit)
LC50 (inhalation (vapor), rat)
> 5,000 mg/kg
9,510 mg/kg
3.35 mg/L / 7 hours
Propylene Glycol (CAS no.: 57-55-6)
LD50 (oral, rat)
LD50 (dermal, rat)
LC50 (inhalation (dust/mist), rabbit)
> 20,000 mg/kg
> 2,000 mg/kg
317.042 mg/L / 2 hours
11.3 Skin corrosion/irritation
Prolonged skin contact is essentially non-irritating to skin. Repeated contact may cause flaking and softening of
skin.
11.4 Serious eye damage/irritation
May cause slight temporary eye irritation. Corneal injury is unlikely. Mist may cause eye irritation.
11.5 Respiratory or skin sensitization
Did not cause allergic skin reactions when tested in humans. For respiratory sensitization; no relevant data found.
11.6 Ingestion irritation
Very low toxicity if swallowed. Harmful effects not anticipated from swallowing small amounts.