User Manual

GIANNI INDUSTRIES, INC.
Copyright 2009 Gianni industries, inc. All rights reserved.
DM-CA-DG-100 Ver. E Published on 2009.11.27
The products are manufactured under an ISO
9001 QC 080000 Certified Quality
Management Program environment back its
product quality, performance and commitment
to customer satisfaction.
&
Features
Statement
The product is warranted against defects in material and
workmanship while used in normal service for a period of 1
year from the date of sale to the original client. The GEM policy
is one of continual development and improvement; therefore
GEM reserves the right to change specifications without
notice.
Warranty
Specifications
Unit: mm
Split of controller and keypad for high security
Allows up to 99 PIN codes
LED display with audible indication
Metal casting housing with vandal resistant screws
Non-Volatile Memory & Invalid PIN Lock-out
Fully Programmable via keypad and master code
Random user codes for anti-peeping
Deftly dimension for narrow jamb
The is a split of keypad and controller board digital
code-operated for access control, allows up to 99 individual
user PINs, user access PINs ensure that all functions
controlled to authorized persons only.
The memory and relay circuitry are located on the
controller board which can be installed in a secure location up
to 50 M away.
DG-100
Split of units for
controller board and keypad in ranging up to 50 M bring out the
friendly system device for low cost but high security with anti-
tampering as well as convenience and reliability.
Advanced technology made of modern designed for deftly
dimension(keypad)featuring easy installation on to any door
stiles.
20
154
38.8
63
73
Controller Board
Keypad
DG-100
Digital Keypad
1
2
3
4
5
6
7
8
9
0
Operating voltage: 12 VDC
Current draw: Holding: 15mA@12VDC
Pull in: 70mA@12VDC
Output: relays N.O. / N.C./ Com. Output (dry contact)
Relay rating: 0.5A@125VAC
Relay strike time:
Strike time: 1~99 seconds
Strike mode: Access timer or latch
User codes capacity: 99 slots
PIN codes: 5 digit codes (4 digit codes available by special
order)
Operating temperature: -20~+70°C
Ambient humidity: 5~95% relative humidity non-
condensing
Master Code: Default value 12345 (or 1234)
Pressed key time delay: 30 seconds.
EPROM: Non-volatile memory, System will retain all
programs and codes after a total loss of power.
Cable Length: 2-meter (#22 AWG)
Weight:Approx 230g
Color: Beige white
1A@24VDC ,
No. 13, Zhong Sing Road, Tu-Cheng Industrial Zone,
Tu-Cheng City, Taipei, Taiwan 23678
Tel: [phone] / Fax: [phone]
E-Mail: [e-mail]
Website: gianni.tw