Digital Keyless Entry System Operation User's Manual

Copyright Gianni Industries, Inc. All Rights Reserved.
P-MU-DG10-4C Ver. A Publish:2004.09.07 Page: 1/ 2
The Digital Keyless Entry System (4 digit)
Operation User's Manual
DG-11
(Mount)
DG-12
(Mount/ANSI size)
DG-10
(Surface Mount)
ANSI Box
I. Features:
 4 digit codes
 Door Reed Switch Input for Anti-Trailing
 10 user PINs
 Fully Programmable via keypad and master code
 Non-Volatile Memory
 Invalid PIN Lock-out
II. Specifications:
 Operating Voltage: 9~14 Vdc
 Current Draw: Average 30mA, Peak 80mA @ 12Vdc
 Input: One request-to-exit, and time out reed switch
 Relays: N.O./N.C./Com. Output (free voltage contact), 3A@ 125Vac or 30Vdc
 Case Material: ABS （UL94V0）
 Operating Temperature:-20~+70℃
 Ambient Humidity:0~95% relative humidity non-condensing
 Visual Signals:
 Green: Power on
 Red: Relay activated
 Yellow: Program Mode、Lock-out
 Factory Master Code: 1234
 Invalid PIN Lockout: System will shut down 60 seconds while 6 times of incorrectly
password attempted.
 Relay Activation Time: （＊20）
 Pulse mode：1~99 seconds（01~99）
 Latching mode（00）
 EPROM: Non-volatile memory, System will retain all programs and codes after a total
loss of power.
 User PINs: （＊01~＊10）It is possible to program 10 different user PIN codes.