Installation & Assembly

www.GianniniGarden.com
[e-mail]
Pump with 110V 3 prong
power cord. Plug into 110v
GFCI outdoor outlet. Turn
blue knob to adjust water
Clear Vinyl
Tubing. Run
throughout
the center of
fountain.
Hard Surface such as a
concrete pad, compacted
pea gravel, paver stones, or
bricks. If surface is not
exactly level, wood or
plastic shims may be used
to level founain.
Slide power cord through
rubber stopper and secure
rubber stopper in the 2” PVC
coupling. Check for tight t to
avoid leaks.
CAUTION:
~ Excessive weight or pressure on the fountain may cause it to fall. KEEP CHILDREN AND OTHERS FROM CLIMBING,
SITTING OR LEANING ON THE FOUNTAIN AND ITS COMPONENTS.
Secure 2” PVC Pipe (5-6” in
Length) into PVC Coupling.
This PVC pipe stops water
from draining into pond
when Fountain is o
1/2” BarbxBarbxBarb
Tee. Connect vinyl
tubing as shown