User's Manual

OLYMPIA OL2410 Owner's Manual 51

10) During remote access code setting mode, holding “Previous” or “Next”

button will scroll through all the selection from 0 and 9, during this process,

no announcement can be heard. Release the “Previous” or “Next”” button, a

beep will be heard and the last setting will be displayed on the 7-segment LED

with voice prompt.

11) During remote access code setting mode, Press “Stop” button to exit menu

setting mode, a beep can be heard and the setting will be validated.

12) The default remote code is 0000.

9.1.5 Set announce only

1) Press “Menu” button during setting the 4th remote access code. A beep is

heard to validate the setting and enter announce only setting.“Ao” will display on

the 7- segment LED, and it will announce “announce only is on or off”. At the

same time, the “On” or “OF” should display for 1 second on the 7-segment.

2) Press “Previous” or “Next” button to switch announce only on or off. The

LED will display “On or OF” with the voice prompt “ On or off”.

3) During announce only setting mode, press the “Menu” button to confirm the

setting and enter the message alert setting mode.

4) During announce only setting mode, Press “Stop” button to exit menu setting

mode. A beep can be heard to validate the setting.

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com