User's Manual

OLYMPIA OL2410 Owner's Manual 53

2) Press “Previous” or “Next” button to switch the answer on/off, the 7-segment

LED will display “On or OF”, at the same time the unit will announce

“ On/Off” according to current setting.

3) During the base ringer setting mode, press the “Menu” button to confirm the

setting and enter the number of rings setting mode.

4) During the base ringer setting mode, Press “Stop” button to exit menu setting.

A beep can be heard to validate the setting.

5) The default setting is on. When Base ringer is on, base ringer appears in the

base speaker following the ring cadence.

9.1.8 Set number of rings(two/ four / toll saver)

1) Press “Menu” button during base ringer setting mode. A beep is heard to

validate the setting and enter number of rings setting mode. “Nr” will be displayed

on the 7-segment LED, and it will announce “number of rings selected is 2/4/toll

saver”, and “2” or “4” or “tS” should display for 1 second on the 7-segment.

2) Press “Previous” or “Next” button to modify the setting. The 7-segment LED

will display “r2 or r4 or tS” with voice prompt “ two or four or toll saver”.

3) During the number of rings setting mode, press the “Menu” button to confirm

the setting and return to Answer On / Off setting mode.

PDF created with FinePrint pdfFactory trial version http://www.fineprint.com