User's Manual

56 OLYMPIA OL2410 Owner's Manual
6) After playing a message, the DAM announces the day and time it was
received. While the message plays, the 7-segments LED displays the number
of the message.
7) After playing the last message in a mailbox, DAM announces “End of
messages.” if the DAM has less than four minutes of recording time left, it
announces remaining time.
8) If an incoming call comes during message playback, playback will stop
automatically and the unit starts to ring.
l Stop
1) During message playback, Press “Stop” button to stop playing, then a short
beep can be heard and return to standby mode.
l Repeat /Previous
During message playback, Press “Previous” key to play current message again
after 1 seconds of current message playback. Otherwise, it plays previous message.
l Skip
During message playback, Press “ Next ” key to play the next message.
9.2.3 Delete Message.
l Delete a message
1) During message playback, press Delete button. The current message will be
deleted, and the unit will announce “message is deleted”, the next message will
start to play, and the 7-segment LED displays the correct message number.
2) If no message is remained, the unit returns to standby state.
l Delete all messages in particular mailbox
1) At standby mode, press and hold Delete button until a short beep is heard
followed by the announcement “please select a mailbox”.
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com