User's Manual

62 OLYMPIA OL2410 Owner's Manual
9.6 Call screening / intercept
1) Make sure the DAM is on, and set the message playback volume control
above level 1 so you can hear the caller’s message.
2) If you decide to take the call, press PHONE on the handset.
9.7 Message Window Display
Window display Description
0
No new messages in any mailbox
1-50, flashing
Total number of messages in all mailboxes
0 - 50 F
Memory is full, or total number of message
is 50
Counting 0 to 59
Duration of announcement or memo
recording
1-50
Current message number during message
playback
1-8,steady for one second
Indicates volume level selected when
volume “UP” or volume “DOWN” is
pressed.
00-99
Current Remote Access Code while setting
ON or OF
Displayed when any setting is changed
from On or Off
CL normal display
Clock needs to be set
--
DAM is answering a call or is in remote
operation
88, flashing
DAM is in initializing
A1/A2
Announcement 1 /announcement 2
An
Enter Answer on/off menu mode
2/4/tS During setting number of rings
Ac Enter remote access code
Ao Enter announce only
AL Enter message alert
br Enter base ringer
Nr Enter number of rings
d1-d7 Setting the day of the time
00-23 Setting the hour of the time
00-59 Setting the minute of the time
PDF created with FinePrint pdfFactory trial version http://www.fineprint.com