User's Manual
Table Of Contents
- SAFETY AND GENERAL INFORMATION
- Important Information for Safe and Efficient Operation
- Safety and General
- OPERATIONAL CAUTIONS
- USING YOUR RADIO
- Turning Your Radio On And Off
- Volume
- Select Channel
- Scan
- Scan Advance
- Monitor
- Removing Channels form the Scan List
- Interference Eliminator Code (CTCSS)
- Time-out Timer
- Keypad Lock
- Channel Busy Indicator
- Setting and Transmitting Call Tone
- Transmitting a Talk Confirmation Tone
- Hands Free Use (VOX)
- Setting Sensitivity Levels
- Battery Meter
- Using Audio Accessory (optional)
- FCC INFORMATION
Hands Free Use (VOX)
VOX allows you to transmit hands free by talking while using VOX accessories connected to the
radio.
1. Turn the radio off.
2. Insert the plug of the VOX accessory firmly into the accessory jack.
3. Turn the radio on and “VOX” is displayed.
4. Lower the radio volume before placing the accessory on your head or in your ear.
5. To transmit, speak into the accessory microphone. There is a short delay between the time
you start talking and radio transmission.
6. To receive, stop talking.
To turn VOX off, press
or remove the VOX accessory.
Setting Sensitivity Levels
Adjusting your radio’s sensitivity level helps minimize the possibility of unintended noise
triggering a transmission and helps the radio pick up soft voices.
1. Press mode/
4 times or until the sensitivity level number and “VOX” is shown.
2. Press
or to select the sensitivity level:
1 = Low Sensitivity (for noisy environments)
2 = Medium Sensitivity (for most environments)
3 = High Sensitivity (for quiet environments)
12 of 15
Note: When you connect a VOX accessory, the radio is automatically set to the last chosen