User's Guide

26
• Report all Bluetooth devices
• Report only selected Bluetooth devices (see Discovery, Adding Specific Devices and
Discovery, Deleting Specific Devices).
Select the desired option from the drop-down list.
To limit the type of remote devices reported:
BTW can report only specific devices, specific class(es) of device(s), or specific type(s) of
device(s) within a class. Discovered devices can be mixed-and-matched; you can discover one or
more specific devices, classes of devices and types of devices within a class at the same time.
When BTW is configured to report only specific devices, it reports ONLY those devices.
To report only specific devices
• From the Bluetooth Configuration Panel, on the Discovery tab, select "Report only selected
Bluetooth devices" from the drop-down list and then click the Add Device button.
• In the Discoverable devices... dialog box, highlight the device to be discovered and click the
OK button. Multiple devices can be selected at the same time using SHIFT + click and/or
CTRL + Click.
To add a device to the list of devices to be discovered, that device must be within range of the
Bluetooth radio; devices that are not within radio range will not appear in the list of devices in the
Discoverable devices... dialog box.
To report only a specific class of device
1.From the Bluetooth Configuration Panel, on the Discovery tab, select "Report only selected
Bluetooth devices" from the drop-down list and then click the Add Device button.
2.In the Discoverable devices... dialog box, select "Allow this computer to discover specific
devices or types of devices within a class."
3.From the Class drop-down list, select a class of devices to be discovered.
4.Click the OK button.
To report only a specific a type of device within a class
1.Configure BTW to report the class of device that the type of device belongs to (follow the steps
in "Report only a specific class of device," above, but do NOT click the OK button).
2.In the Discoverable devices... dialog box, from the Type drop-down menu select the specific
type of device to be reported.
3.Click the OK button.
To remove a device from the list of devices to be discovered: in the Bluetooth Configuration
Panel, from the Discovery tab, select the device to be removed and click the Delete button.
If "Report only selected Bluetooth devices" is not selected the Delete button will not be available.