Bluetooth Headset
Welcome Copyright Warranty © 2003, Wave Industries Ltd. All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under the copyright laws. The information contained in this document is subject to change without notice. Wave Industries makes no warranty of any kind with respect to this information.
Table of Contents WELCOME Copyright ............................................. 1 Trademark Information ............................ 1 Warranty ............................................. 1 INTRODUCTION Bluetooth Wireless Technology ................... 3 Important Notes and Safety Information ........ 3 GETTING STARTED Package Contents and Key Layout ............... 4 Headset Diagram .................................... 4 Features .............................................. 5 Battery and Charging ...
Introduction Bluetooth Wireless Technology Important Notes and Safety Information The Olympia headset complies with Bluetooth Specification V1.1 and is designed for devices supporting Bluetooth wireless technology such as the Olympia Cordless Data phone, various mobile phones and any other device that supports the Headset profile. Important Notes The default PIN code is *2222* and is not user changeable.
Getting Started Package contents and Key Layout 1. Bluetooth Headset 2. Proprietary Headset Charger 3. Power Adaptor 4. Ear Grips 5. Lanyard 6. User Guide Headset Diagram Dual colour LED Indicator 3 Uni-directional microphone Call Buttons Ear Support Arms 2 6 Microphone Boom Arm 4 Cushioned Ear piece 1 5 Volume Buttons Page 4 www.olympia-life.
Getting Started Features Features • Uni-directional microphone and earpiece • Movable boom arm for easy adjustment of microphone position • Flexible ear support arms and detachable ear grips for different sized ears • Dual colour LED status indication • Volume Up/Down • Internal Lithium Polymer rechargeable battery with 5 hours talk time and 3 days standby • Low battery warning • Call Mute • Call Hold • Operation range of 10m from mobile phone • Proprietary headset charger • Can be worn on left or right
Getting Started Battery and Charger Battery and Charger Before first use the battery is required to be charged for 2-3 hours. Once the headset is fully charged, it is ready to use. • The charger LED is red when the headset is being charged • The charger LED turns green when the headset is fully charged. • When the charger is on but no headset is mounted the LED is green.
Getting Started Fitting the headset Fitting the headset The headset is designed to be worn on either ear. One or both of the ear grips may be used for better fit. 1. Lift boom arm and slide headset onto the ear from the back. Pivot cushioned earpiece into ear so that the headset arms wrap around top and bottom of ear. USER GUIDE 2. Tighten headset arms to hold device in place securely but comfortably around the ear. www.olympia-life.
Getting Started Fitting the headset Fitting the headset 3. Angle of microphone boom can be adjusted to nearest position to mouth. Page 8 4. For a better fit, one or both of the ear grips may be placed on the headset arms. Reposition headset on ear as before. www.olympia-life.
Getting Started Fitting the headset Fitting the headset 5. The headset, firmly in place, can be operated using just one hand. 6. A lanyard is provided for easy mobility. USER GUIDE www.olympia-life.
Getting Started Pairing Pairing The Bluetooth headset can be connected wirelessly to a Bluetooth enabled phone after going through a process called Pairing. Pairing enables the two devices to communicate with each other. Note: 1. The first time the headset is turned on it will automatically be ready for pairing. • Press the Call buttons for at least 8 seconds until the LED is on solid blue. 2.
Using The Headset Turning the Headset ON and OFF To make a Call To Turn On • Once the headset is paired to a phone, make the call by using the phone in the usual way. • Beeps will be heard to confirm acceptance. To Turn Off Note: Some phone models will prompt whether the call is to be taken at the headset or the phone itself. Please refer to phone manual for more details. • Press and hold the Call button until blue LED blinks. • Beeps will indicate the headset is going to power on.
During a Call Volume Control Call Hold • There are 7 volume levels. Press and release Vol. Up and Vol. down buttons to adjust volume. Each press will give a single beep. When the volume reaches a maximum/minimum level 4 beeps will sound. • In Call hold mode both the microphone and earpiece are turned off. • Press and hold either Vol. up or Vol. down buttons for at least 2 seconds. When 3 beeps are heard release button. • Press button again and release. • Beeps will sound to confirm.
Trouble Shooting Trouble shooting Remove Pairing If the headset does not operate please ensure the following: To remove a paired device on the headset, for instance to change default user of the headset: • The Bluetooth feature is activated on the phone • The headset is on and it is paired with the phone • The headset is with a distance of 10 metres from the phone If the above fails you may reset the headset by pressing the Call, Vol. up and Vol. down buttons simultaneously.
CONSUMER INFORMATION FCC Notice Helpline Numbers This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
