User's Manual
Table Of Contents
- SAFETY AND GENERAL INFORMATION
- Important Information for Safe and Efficient Operation
- Safety and General
- Two-way Radio Operation
- Approved Accessories
- OPERATIONAL CAUTIONS
- FCC LICENSING INFORMATION
- FCC STATEMENTS:
- CONTROL BUTTONS AND DISPLAY ICONS–
- MODEL R1010 SERIES
- GETTING STARTED
- INITIAL SETUP
- TALKING AND LISTENING
- SPECIAL FEATURES
- ACCESSORIES
- WARRANTY
Installing the NiMH Battery Pack:
1. Follow step 2 above to remove the battery cover.
2. Remove the battery pack from the clear plastic bag. Do not disassemble or unwrap the
battery pack.
3. Insert the NiMH battery pack so the metal contacts on the side of the battery are facing
outward from the radio to connect with the contacts on the battery door.
4. Reposition the battery cover and press down to secure.
Note: 1. Turn radio off while in charging tray
2. When your radio is plugged into the AC power adapter, your radio will not work.
Battery Meter
The battery icon shows the battery charge level, from full to empty. When the battery is
empty, the radio chirps periodically after you release the PTT button. The radio powers off when
the voltage drops below a predetermined level to protect the rechargeable battery.
Note: Remove the batteries before storing your radio for extended periods of time. Batteries
corrode over time and may cause permanent damage to your radio.
(29-09) R1010 IB 1_0B 050928.doc