User's Manual
Table Of Contents
- SAFETY AND GENERAL INFORMATION
- Important Information for Safe and Efficient Operation
- Safety and General
- Two-way Radio Operation
- Approved Accessories
- OPERATIONAL CAUTIONS
- FCC LICENSING INFORMATION
- FCC STATEMENTS:
- CONTROL BUTTONS AND DISPLAY ICONS–
- MODEL R1010 SERIES
- GETTING STARTED
- INITIAL SETUP
- TALKING AND LISTENING
- SPECIAL FEATURES
- ACCESSORIES
- WARRANTY
Turning Your Radio On and Off
To turn on, press and hold the. button until the radio chirps and briefly shows icons of all of
your radio’s available features for a brief period. The display then scrolls through the available
channels (1 – 22) and Interference Eliminator Codes (0 – 38).
To turn off the radio, press and hold the
button until the display becomes blank.
INITIAL SETUP
Selecting a Channel
The channel is the frequency that your radio uses to transmit. Your radio has multiple channels
that can be shared on a “take turns” basis. For uninterrupted communication, do not talk on a
channel if someone else if using it.
Your radio has 22 channels. Channels 1 – 7 and 15 – 22 are one watt (two watts if you press PTT
Boost). Channels 8 – 14 are 0.5 watt (one watt if using power boost).
To check for activity on a channel before you talk, press and hold
. If you hear static, the
channel is clear to use.
1. Press or to set the channel
2. Press
or PTT Boost to save the channel setting or MENU to continue set up.
(29-09) R1010 IB 1_0B 050928.doc