User's Manual

Note: If your radio’s interference Eliminator Code is set to
while scanning, the radio checks for
activity on each channel regardless of the code used on the channel. If your radio’s Interference
Eliminator Code is set to
, the radio checks for activity only on channels using codes
and ignores channels using code .
Group Scanning
In Group scanning mode, the radio only scan among the channels enabled in the group and the
current channel.
To add a channel into the group
1. Press MENU key until the current channel number and a ‘-’ displays in LCD;
2. Press
or to change the ‘-’ into ‘y’;
3. Press PTT to save the code setting or MENU to continue set up.
To enable Group Scanning:
1. Press MENU key until a ‘-’ and ‘GP’ (Stands for ‘group’) displays in LCD;
2. Press
or to change the ‘-’ into ‘y’;
3. Press PTT to save the code setting or MENU to continue set up.
(29-09) R1010 IB 1_0B 050928.doc