User's Manual
Table Of Contents
- SAFETY AND GENERAL INFORMATION
- Important Information for Safe and Efficient Operation
- Safety and General
- Two-way Radio Operation
- Approved Accessories
- OPERATIONAL CAUTIONS
- FCC LICENSING INFORMATION
- FCC STATEMENTS:
- CONTROL BUTTONS AND DISPLAY ICONS–
- MODEL R1010 SERIES
- GETTING STARTED
- INITIAL SETUP
- TALKING AND LISTENING
- SPECIAL FEATURES
- ACCESSORIES
- WARRANTY
Removing Channels from the Scan List (Nuisance Delete Feature)
To prevent the radio from scanning a channel, press and hold or for at least three seconds,
then release. This temporarily removes the channel from the scan list.
To restore the channels, turn the radio off and then back on. The channel is now restored.
Note: You cannot remove your home channel from the scan list. The home channel is the channel
your radio was set to when you started the scanning.
Baby Monitor Feature
Your radios may be used as a baby monitor. To use this feature:
1. Turn off your radio.
2. Turn your radio on with
button pressed.
The "IVOX" icon will appear in the display to indicate that the baby monitor feature is active.
To transmit, speak into the radio microphone. To receive, simply stop talking.
4. Pressing
or PTT Boost to transmit will disable the baby monitor feature.
(29-09) R1010 IB 1_0B 050928.doc
5. Press
or PTT Boost button for a very short time to activate the baby monitor again.
IVOX will appear on the screen again.