LOGO USER GUIDE RADIO PHOTO
SAFETY AND GENERAL INFORMATION Important Information for Safe and Efficient Operation Please read this information before using your radio. Safety and General 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Do not transmit more than 50% of time. It is important as the radio generates measurable RF energy exposure only when transmitting. Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment.
FCC LICENSING INFORMATION This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which require an FCC (Federal Communications Commission) license. A user must be licensed prior to operating on any GMRS channels. Serious penalties could result for unlicensed use of GMRS channels, in violation of FCC rules, as stipulated in the Communications Act’s Sections 501 and 502 (amended).
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Safety Information Disposal You are obliged to dispose of consumable goods according to legal requirements. The adjacent symbol indicates that electrical and electronic apparatus and batteries no longer required must be disposed of separate from domestic waste. Electrical and electronic devices must be disposed of at suitable collection points provided by the public waste authorities.
Putting the WalkieíTalkies into Operation 2 3XWWLQJ WKH :DONLHí7DONLHV LQWR 2SHUDWLRQ Safety information Attention: It is essential to read the Safety Information in Chapter 1 before starting up. Charging the ZDONLHíWDONLHV Connect the charging station as illustrated in the diagram. For safety reasons, only use the power adapter plug supplied. Your radio will not Transmit / Receive during charging. Set the main switch, located on the underside of the ZDONLHíWDONLHV, to ON.
Operating Elements 3 Operating Elements The features and functions of the product are depicted in the diagram below.
Operating the Walkieí7alkies 4 Operating the :DONLHí7DONLHV Display and notation of operating sequences Press the button depicted Press and hold the button displayed Release the button displayed , , y Display indicator Speak into the microphone Switching the ZDONLHíWDONLHV on/off 11 7KH main switch is located on the underside of each walkieí talkie. Set the switch to ON before switching the walkieítalkie on. Switch the wDONLHíWDONLH on A beep tone is heard.
Operating the WalkieíTalkies Receiving 13 , Receive Radio signals cannot be received when the button is being pressed. Selecting a channel There are 22 radio channels available in the frequency range 462.5625 MHz to 467.7125 MHz. , / , Select the channel and confirm it 1x Channel 1 2 3 4 5 6 7 8 9 10 11 Frequency(MHz) Channel 462.5625 12 462.5875 13 462.6125 14 462.6375 15 462.6625 16 462.6875 17 462.7125 18 467.5625 19 467.5875 20 467.6125 21 467.6375 22 Frequency(MHz) 467.6625 467.6875 467.7125 462.
Operating the WalkieíTalkies 2x / , Activate programming mode Select the code and confirm it An exception here is code 0 (zero). In the case of this setting, all the calls on the set channel can be heard regardless of the CTCSS/CDCSS code. To be able to participate in the radio communication, it may be necessary to set the necessary CTCSS/CDCSS code.
Operating the Walkieí7alkies Resuming channel scanning or Resume channel scanning Excluding 14 a channel If a channel found during the channel scanning process should not be considered for subsequent use, it can be excluded. All the channels are taken into consideration again when a new channel scan is started. During the time that the walkieítalkie is temporarily stopped on the unwanted channel, press and hold / for 3 seconds to exclude that channel. the , 3 sec.
Operating the Walkieí7alkies Key lock 7KH key lock function prevents inadvertent modification of settings. When the key lock function is activated, the icon appears in the display. Activating 15 , 3 sec. 16 Deactivating , 3 sec. Activate the key lock Deactivate the key lock Confirmation signal 7KH confirmation signal is issued on releasing the button. 7his indicates to the caller that you have ended transmission. 17 Activating/Deactivating the confirmation signal Switch the walkieítalkie off.
Operating the Walkieí7alkies Automatic deactivation 7KH walkieítalkies can be set up so that they are automatically switched off after a certain time. It can be set to 30, 60 or 90 min5x or , Activate programming mode Select the time and confirm it VOX1 / iVOX 2 (handsfree) When this function is active, the walkieítalkie automatically starts to transmit when the unit detects your voice or a sound. When you start to speak, there is a slight delay before the wDONLHíWDONLH VWDrts to transmit.
Operating the Walkieí7alkies Deactivating VOX mode 7o deactivate VOX mode, pull the headset plug out of the conbutton. nection socket or press the Activating iVOX mode When using the handsfree function in iVOX mode, conversation button on the is carried out via the wDONLHíWDONLH 7he walkieítalkie need not be pressed to transmit. 1. Switch the walkieítalkie off. 2. Press and hold the button and, while doing so, switch the walkieítalkie on again. iVOX" appears in the display.
In Case of Problems 5 In Case of Problems Should problems arise with the walkieítalkies, please refer to the following information first. In the case of claims under the terms of guarantee, please contact your sales outlet. There is a 2 year period of guarantee.
Technical Properties 6 Technical Properties Technical data Feature Value Power(ERP) 0.5 W Range Total operating time 15 miles with conditional Up to 10 h (Based on 5 % transmit, 5 % receive and 90 % standby time) Max. talk time Up to 36 min. Charging time (double charging station) Min. 18 h Rechargeable battery(Internal) Power supply 3.
