User's Manual

Putting the WalkieíTalkies into Operation
4
2 3XWWLQJWKH:DONLHí7DONLHVLQWR2SHUDWLRQ
Safety information
Attention: It is essential to read the Safety Information
in Chapter 1 before starting up.
Charging the ZDONLHíWDONLHV
Connect the charging station as illustrated in the diagram.
For safety reasons, only use the power adapter plug supplied.
Your radio will not Transmit / Receive during charging.
Set the main switch, located on the underside of the
ZDONLHíWDONLHV, to ON.
Mains power
outlet
Before using the wDONLHíWDONLHVfor the first time, charge them for
at least 18 hours. When the walkieítalkies are connected cor-
rectly, the red LEDs light up. They go out when the walkieítalkies
are fully charged.
Do not charge the ZDONLHíWDONLHV with charging units
from other manufacturers.
For optimal battery life, remove the radio from the char-
ger after fully charging.
The current battery charge status is indicated in the display:
Full Half empty Low Empty
The wDONLHíWDONLHVQHHGWRbe recharged as soon as the
indicator flashes in the display and acoustic warning
signals are issued.