User's Manual

11
12
Operating the Walkieí7alkies
6
4 Operating the :DONLHí7DONLHV
Display and notation of operating sequences
Press the button depicted
, Press and hold the button
displayed
, Release the button displayed
y Display indicator
Speak into the microphone
Switching the ZDONLHíWDONLHV on/off
7KH main switch is located on the underside of each walkieí
talkie. Set the switch to ON before switching the walkieítalkie on.
Switch the wDONLHíWDONLHon
A beep tone is heard. 7he channel and code used last
time will display and the Ready LED flashes.
Switch the walkieítalkie off
If the walkieítalkie is to remain unused for a longer
period, we recommend you set the main switch to OFF.
If set the switch to OFF for a long time, the channel and
code will return to its default setting.
Volume control
/ Raise or lower the volume
(16 levels)
7UDQVPLWWLQg and receiving
7ransmitting
After pressing the button, the 7ransmit LED lights up.
If the
button is pressed longer than 60 seconds, a warning
signal is issued. 7ransmission is interrupted.
, , 7ransmit
Hold the ZDONLHíWDONLH approx. 5 to 7 cm from your
mouth and speak at a normal volume. In order to talk to
other subscribers, the respective ZDONLHíWDONLHV must
be set to the same channel and &7&66/CDCSS codes.