User Manual

T5000 & T5500 user guide --- Pg 15
15
Getting Started
T5000 & T5500 user guide --- Pg 16
16
Getting Started
Battery Meter
The battery icon shows the battery charge level, from full to empty . When
the battery is empty, the radio chirps periodically after releasing . The radio powers
off when the voltage drops below a predetermined level to protect the rechargeable
battery.
Note: Remove the batteries before storing your radio for extended periods of time.
Batteries corrode over time and may cause permanent damage to your radio.
Using the Desk Stand Charger (Optional Accessory)
The desk stand charger provides drop-in charging convenience for NiCd batteries and
can be placed on any flat surface, such as a desk or workbench. Charge the NiCd battery
overnight (at least 16 hours) before using it for the first time. After the initial charge,
an empty battery is fully charged within 14 hours.
Turn the radio off and remove the battery cover.
Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
Insert the NiCd battery pack so the metal contacts on the side of the battery are
facing outward from the radio to connect with the contacts on the battery door.
Reposition the battery cover and press down to secure.
Plug the AC power supply into the plug on the desk stand.
Plug the AC power supply into a standard wall outlet.
Slide the radio into one of the charging pockets facing forward.
1.
2.
3.
4.
5.
6.
7.
To charge the battery pack separately from the radio:
Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
Insert the battery pack into the charging pocket. Make sure the metal contacts on
the side of the battery are making contact with the contacts inside the charger.
Plug the AC power supply into the plug on the desk stand.
Plug the AC power supply into a standard wall outlet.
1.
2.
3.
4.
Notes
When moving between hot and cold temperatures, do not charge the battery
until the battery temperature acclimates (usually about 20 minutes).
For optimal battery life, remove the radio or battery from the charger within
16 hours. Do not store the radio in the charger.
•
•
Attaching the Belt Clip
Align the belt clip post with the hole in the back of the radio.
Gently push until the clip clicks into place.
1.
2.
Removing the Belt Clip
Push down on the release tab at the top of the belt clip to
release the catch.
Pull the belt clip away from the back of the radio.
1.
2.