User's Manual

Getting Started
15
P
r
e
lim
ina
r
y
1. Turn the radio off and remove the battery cover.
2. Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
3. Insert the NiCd battery pack so the metal contacts on the side of the battery
are facing outward from the radio to connect with the contacts on the battery
door.
4. Reposition the battery cover and press down to secure.
5. Plug the AC power supply into the plug on the desk stand.
6. Plug the AC power supply into a standard wall outlet.
7. Slide the radio into one of the charging pockets facing forward.
To charge the battery pack separately from the radio:
1. Remove the battery pack from the clear plastic bag.
Do not disassemble or unwrap the battery pack.
2. Insert the battery pack into the charging pocket. Make sure the metal contacts
on the side of the battery are making contact with the contacts inside the
charger.
3. Plug the AC power supply into the plug on the desk stand.
4. Plug the AC power supply into a standard wall outlet.
Notes
• When moving between hot and cold temperatures, do not charge the battery
until the battery temperature acclimates (usually about 20 minutes).
4110w17o.book Page 15 Monday, January 20, 2003 12:20 PM