User's Manual

Special Features
19
P
r
e
lim
ina
r
y
Special Features
Interference Eliminator Codes
Interference Eliminator Codes help minimize interference by providing you with a
choice of code combinations.
To set the code for a channel:
1. Press
\ until the code starts to flash.
2. Press
] or [ to select the code.
3. Press
M
to save the code setting.
You can set a different code for each channel using this procedure.
Note: You must set the Interference Eliminator Code to 0 on an FRS radio that
uses Interference Eliminator Codes to communicate with other FRS radios that
do not have Interference Eliminator Codes.
Push to Talk Timeout Timer
To prevent accidental transmissions and save battery life, the radio emits a
continuous warning tone and stops transmitting if you press
M
for 60 continuous
seconds.
Keypad Lock
To avoid accidentally changing your radio settings, press and hold
\ for
3 seconds or until f displays. You can turn the radio on and off, adjust the
4110w17o.book Page 19 Monday, January 20, 2003 12:20 PM