User's Manual

Alerts
23
P
r
e
lim
ina
r
y
Transmitting a Talk Confirmation Tone
You can set your radio to transmit a unique tone when you finish transmitting. It
is like saying Roger or Over to let others know you are finished talking.
• To turn talk confirmation on, press and hold
] while you turn the radio on.
When you release
M
after transmitting, your call tone transmits and !
displays.
• To turn talk confirmation off, turn your radio off and then back on while
pressing and holding
].
QT Noise Filtering
The QT noise filtering feature helps ensure uninterrupted communication by
preventing you from hearing transmissions from other radios. It is useful in places
where there is heavy radio traffic, such as at an amusement park or ski resort.
Note: QT noise filtering is not available while the radio is scanning.
To turn QT noise filtering on and off:
1. Press
\ until F displays.
2. Press
] until Y displays to turn QT noise filtering on, or [ to turn it off.
3. Press
\ to confirm your selection.
To transmit to a radio that has QT noise filtering turned on:
1. Select the same channel and Interference Eliminator Code as the other radio.
2. Press ^ to send a call tone and temporarily open the speaker on the
receiving radio.
4110w17o.book Page 23 Monday, January 20, 2003 12:20 PM