User Manual Model: T6100
SAFETY INFORMATION Transmit and Receive Procedure Your two-way radio contains a transmitter and a receiver. To control your exposure and ensure compliance with the general population/uncontrolled environment exposure limits, do not transmit more than 50% of the time. Transmitting 50% of the time, or less, is important because the radio generates measurable RF energy exposure only when transmitting (in terms of measuring standards compliance).
YOUR NEW RADIO The two-way radios operate on FRS/GMRS 462/467 frequencies, and can be used in USA & Canada where the frequencies are authorized, subject to applicable regulations. Turning Your Radio On And Off Turn Volume button clockwise to turn your radio on. The radio chirps and the display will show all feature icons that your radio has available for a brief period. The display will show the channel 1 - 22 and interference eliminator code 0 - 38. Turn volume button anticlockwise to turn your radio off.
• If you want to respond to the transmission, press “PTT” button within 5 seconds and you can respond. • The radio will resume scanning after 5 seconds of inactivity on the channel. • To stop scanning, briefly press and release “MON” button. Scan Advance If scan stops on a channel that you don’t want to listen to, briefly press “+” or “-“ button to resume scanning for the next active channel.
• When the roger beep is enabled Icon will show in the display. • When you release the “PTT” button you will hear the roger beep. Stop Watch This radio have a additional function that is Stop watch. To Start the stop watch • With the radio on, press “MENU” button until "00" “00” appears in the display. • Press.”+” stop watch will start running .
